Quality values.

SAN

š Values Units Test methods Types

SAN 1 SAN 2 SAN 3 SAN 4

1. Melt flow index (220°C, 10 kg)
(200°C, 5 kg) g/10 min GOST 11645-73
ASTM D-1238
5,5 - 7,5
0,5 - 0,7
11 - 16,5
1,0 - 1,5
22 - 27
2,0 - 2,5
33 - 44
3,0 - 4,0

2. Tensile strength (5 mm/min) MPa GOST 11262-80
ASTM D-638 68 64 60 58

3. Vicat softening point
(5 kg, 50° C/hr) °C GOST 15088-83
ASTM D-1525 102 101 100 98

4. Izod impact strength
(3,2 mm) kJ/m² GOST 19109-84
ASTM D-256 (A) 2,2 2,0 1,8 1,6

5. MFI range of one lot % Plastpolymer ą 10 ą 10 ą 15 ą 15

6. Residual monomer content (styrene)
– styrene
– acrylonitrile % GOST 15820-82 0,05 0,05 0,05 0,05

š	Values	Units	Test methods	Types
š	Values	Units	Test methods	SAN 1	SAN 2	SAN 3	SAN 4
1.	Melt flow index (220°C, 10 kg) (200°C, 5 kg)	g/10 min	GOST 11645-73 ASTM D-1238	5,5 - 7,5 0,5 - 0,7	11 - 16,5 1,0 - 1,5	22 - 27 2,0 - 2,5	33 - 44 3,0 - 4,0
2.	Tensile strength (5 mm/min)	MPa	GOST 11262-80 ASTM D-638	68	64	60	58
3.	Vicat softening point (5 kg, 50° C/hr)	°C	GOST 15088-83 ASTM D-1525	102	101	100	98
4.	Izod impact strength (3,2 mm)	kJ/m²	GOST 19109-84 ASTM D-256 (A)	2,2	2,0	1,8	1,6
5.	MFI range of one lot	%	Plastpolymer	ą 10	ą 10	ą 15	ą 15
6.	Residual monomer content (styrene) – styrene – acrylonitrile	%	GOST 15820-82	0,05	0,05	0,05	0,05